Lunar FMB Semiautomatisk båndsag 

Cutting capacity

	mm	mm	mm	mm
0°	305	300	300x370	300x370
45°	260	240	155x260	300x220
60°	170	160	160x170	255x150

• Semiautomatic band saw machine to cut from 0° to 60°.

• Head structure in three parts: special aluminium alloy, steel and cast iron.

• Reduction gearbox with inclined grinded case hardened teeth lubricated with long lasting grease.

• VHZ electronical blade speed control, 16÷120 m/min.

• Connection of the motor wheel to a flange with two conical bearings.

• Head feeding system with hydraulic cylinder and descent adjustment by single-turn flow valve placed in front position. Dynamometric blade tensioning.

• Blade guide with combined action of side bearings, carbide plates and top bearing. Blade cleaning idle brush easy to be adjusted and handy.

• Material clamping cast iron vice with manual positioning, equipped with hydraulic locking cylinder.

• Working top and control panel placed in the most ergonomic position.

• Head rotation with stops at 0°, 45° and 60°, graduated scale for angle measure reading and strong locking lever.

• Material feeding roller on loading side with a resistant double position support.

• Strong millimetres length stop for measuring the cutting length 0÷600 mm.

• Heavy-duty machine basement made with different thickness metal sheets and chips holding sides.

• Front door with key locking. 

• 30-liters capacity coolant tank and electric pump for both blade-guides cooling.

• Hydraulic unit controlling the head cylinder and the vice cylinder movements.

• Electric cabinet with 24VAC-auxiliary voltage, lockable main switch and operator drives. 

• Total protection against highest voltage and short circuit current. Protection level IP 55.

• Push buttons control panel to carry out all machine movements and detect possible alarms. Line voltage: 400V/50Hz/3Ph standard (Also available 230V/50Hz/1Ph-230V/50Hz/3Ph-220V/60Hz/3Ph- 440V/60Hz/3Ph). 

• Machine colours: yellow RAL 1018 and grey RAL 7036.