Olimpus 2 FMB Semiautomatisk båndsag

Olimpus 2 semiautomatisk båndsag

Cutting capacity

	mm	mm	mm	mm
0°	510	460	450x750	460x600
45°	440	430	-	430x450
60°	-	-	-	-
SHO 0°	540	500	450x750	500x700

• Semiautomatic band saw to cut from 0° to 45° right.

• Head structure made in steel. Blade inclined of 5° to help section bars cut. 

• Device against blade vibrations to reduce noise.

• Broken blade micro.

• Cutting zone lightening to help user’s work.

• Head approach on two chromate columns lubricated by a centralized system.

• Dynamometric blade tensioning.

• Head feeding system with hydraulic cylinder and front balanced valve for feeding regulation and cutting optimizing.

• Blade cleaning brush driven by gearbox.

• VHZ electronical blade speed regulation for a wide range of blade speed selection.

• Blade guide with combined action of side bearings, carbide plates and top bearing.

• Gearbox in hardened and grinded steel gears lubricated with long lasting grease.

• Material locking vice provided with motorized moving.

• Vice plane with a hardened , wear and tear standing replaceable surface.

• Ergonomic working table and control panel.

• Very resistant work top supporting material on both load and unloading sides. 

• Reference to determine the cutting angle on loading side (45° left).

• Heavy duty carpentry basement.

• Sheet metal construction in different thickness, chips holding system and integrated cooling tank.

• Hydraulic cooling pump for both blade guides.

• Basement rotation system on bearing disc and stop at 45°.

• Hydraulic unit for head cylinder feeding.

• Hydraulic cooling pump for both blade guides.

• Electrical cabinet with 24VAC auxiliary tension,lockable main switch and electric drives.

• Digital display visualize the cutting angle. 

• Total protection against highest voltage and short circuit current. Protection level IP 55.

• Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/3Ph-220V/60Hz/3Ph-440V/60Hz/3Ph also available).

• Machine colours: yellow RAL 1018 and grey RAL 7036.